Time Remaining
Product Ref: WO3004/10
2 people have viewed this product in the last 24 hours
In stock
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Fast dry self sealing polyurethane lacquer with good resistance to domestic detergents and foodstuffs which can be stacked in 1 hour with the correct hardener. It can also form a finish in 1 coat with the appropriate denibbing stain.
Clear, two pack, polyurethane self-priming topcoat for kitchen doors. TU61 has been specially formulated for coating oak and chestnut kitchen doors on automated lines. It is also suitable for all types of manual spray applications, onto all timber types for almost any internal use.
It's main characteristics are to give the same result with a single coat of product as normally obtained with two applications of conventional polyurethane coating, provided the stain is denibbed. It also has one of the fastest re-coat times in the industry. In optimum conditions this can be sanded and re-coated in less than 10 minutes.
Requires 2K hardener. When spraying 2K paints you must use a hardener/catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
| Gloss Level | Matt, Semi-Matt, Gloss, Smell-Gloss |
| Hardener | TH775 / TH715 |
| Mix | 50% |
| Thinners | DT1150 |
| Volume Solids | 40% |
| Spreading Rate | 7m²/litre |
| Surface Dry | 15 minutes at 23°C |
| Application Method | Spray Gun |
| Surfaces | Kitchen Doors |
| Maintenance Cycle | Unlimited use- Stir well before use |
| Number of Coats | 1-3 |
Surface Preparation
TU61 must be applied to substrates that have been lightly sanded and are dust free. It can be very quickly force dried if required to enhance production throughout.
Typical Paint System
Two - three coats of TU61.
Published: March 6, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.
