Product Ref: IPE005-00A01
2 people have viewed this product in the last 24 hours
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Ultrimax Gloss is a highly-versatile topcoat metal gloss paint that can be used on a variety of plant equipment, machinery and steel products. Not only does it offer a high gloss finish, it also dries in record time – meaning you can tick one job off the list sooner.Alkyd topcoat.
Available in a full choice of RAL or British Standard colours, each with excellent gloss retention and resistance to corrosion. Perfect for spray painters who require a high end gloss finish using a 1K paint for ease of application.
Very stable and reliable paint tried and tested over many years and used by top construction brands.
1K High Gloss Industrial Paint for metals.
Perfect for projects requiring high gloss levels such as machinery, fleet and construction work, steel fabrications, railings and plant.
Mixed in-House at our UK facility making this paint available for next day delivery if ordered before 2pm
Available in 5 litre tins or 20 litres with Ring and Latch closers for safe transport and easy opening
Thinner - Use Xylene thinners due to its purity. 20% Max Thinner Ratio.
Gloss Level - Generally provided in High Gloss 80%+ Gloss Level . However other gloss levels can be provided on request. Contact us or at web order point place in NOTES your required gloss level.
Composition - Alkyd Formula
Anti-Corrosive Zinc Phosphate properties in the formula - The product is characterised by high resistance if exposed to weathering and good anti-corrosive power.
Two coats required for optimum finish - primer and topcoat product. Use Ultriprime as a primer.
Ideal Tip Size To Use - 0.015-0.019 tip sizes depending on angle required
Ideal Spray Paint Pump to Use - compatible with a full range
Application - Brush, Spray or Roller
Colours Can Be tined to a full range of RAL Colours, British Standard Colours and Fleet & Machinery Colours
Drying Times - Surface Dry 30minutes / Hard Cure 6-8 hours
Dry and Wet Film Thickness - Dry 40 microns / Wet 85 microns
Theoretical coverage rate - 13m2 per litre
RECOMMENDED USE Versatile easy to use topcoat, suitable for a wide range of industrial applications including plant, machinery, tools, sheet metalwork, gates and railings and general steel fabrications.
Colours:Any RAL & BS
Oil & Solvents Resistance:Good
Published: April 20, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
The below products are often purchased together with the above item.