Time Remaining
Product Ref: IPH005-00A01
2 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Hardtop AX is a two-pack polyurethane topcoat with excellent gloss and colour retention.
As topcoat over an epoxy/epoxy mastic system where a durable, high gloss finish is required in aggressive atmospheric exposure. Cures at low temperatures.
Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating that has a high gloss finish with very good gloss retention. It has good chemical resistance and is a high solids product. It should be used as a topcoat in atmospheric environments.
Jotun Hardtop AX is recommended for topside, deck and superstructure areas in the marine industry and offshore environments, refineries, power plants, bridges and buildings in the protective industry.
Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
Additional certificates and approvals may be available on request.
Robust and reliable finish
The ultimate combination of strong mechanical properties, strong chemical resistance, low dirt pickup and very good colour- and gloss retention, ensures a nice finish that lasts.
Hardtop AX is user friendly and easy to get right due to:
Easy to prepare, high sag resistance, low level of spray dust, minimal odour, consistent gloss.
High volume solids compared to traditional polyurethanes results in low VOC (volatile organic compounds) per litre, making it a modern topcoat with low environmental impact. In addition, Hardtop AX is Xylene free and does not contain any solvents defined as HAPs (hazardous air pollutants).
Jotun Hardtop AX is recommended for topside, deck and superstructure areas in the marine industry and offshore environments, refineries, power plants, bridges and buildings in the protective industry.
Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
The ultimate combination of strong mechanical properties, strong chemical resistance, low dirt pickup and very good colour- and gloss retention, ensures a nice finish that lasts.
Jotun Hardtop AX has high volume solids compared to traditional polyurethanes results in low VOC (volatile organic compounds) per litre, making it a modern topcoat with low environmental impact. In addition, Hardtop AX is Xylene free and does not contain any solvents defined as HAPs (hazardous air pollutants).
Manufacturer - Jotun
For Use On - Metal
Application Method - Brush, Roller, Spray
Sheen - Gloss
Colour - Fully Tintable
Product Certifications - APAS approved to specification 2911
Application - Brush, Roller, Spray
Coverage - 6.3 to 13m²/l
Touch Dry - 1 Hour
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
The below products are often purchased together with the above item.
