Time Remaining
Product Ref: IPF225C
6 people have viewed this product in the last 24 hours
Add Colour Reference After Adding To Basket
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
A single pack, quick drying, durable floor paint.
This quick drying, highly durable paint is suitable for coating most floor surfaces including concrete, steel or timber.
Due to its high solid content, the paint provides excellent coverage of your surface and a tough barrier to water and abrasion. Suitable for industrial use,
Flormax is also resistant to solvents and chemicals. Flormax is surface dry in 1 hour and dry to handle in 12 hours, drying with a semi gloss finish.
For optimum finish ensure floor is free from oil, dirt, rust, grease and any other contaminates. This is a single pack paint, ready to use with no mixing required for application with brush or roller. Ensure paint is thoroughly stirred before use.
Our Flormax paint is available in:
grey floor paint - close to BS 18B21
red floor paint - close to RAL 3011
green floor paint - close to RAL 6002
yellow floor paint - close to RAL 1003
white floor paint - close to RAL 9010
blue floor paint - close to RAL 5013
Choosing the right high performance coatings and protective paints can be a difficult job.
If you require an anti-slid property to your floor paint then you may wish to consider Flormax Anti-Skid Aggregate. Aluminium oxide grains can be added to your Flormax topcoat to ensure an anti-slip finish to resist slips, trips and falls. Search for product IPAS05
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 6, 2023
Published: February 23, 2023
