Time Remaining For Same Day Dispatch -
Time Remaining For Same Day Dispatch -
Product Ref: WO3126
2 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
This high solids white polyurethane primer has excellent sanding and good flexibility which is particularly suitable for MDF but can also be used for high density moulded PU foam.
TU574 is a two pack, white pigmented, ultra-high solids (75%) Polyurethane primer which produces results nearly equal to polyester on timber substrates. The low solvent content means it is also suitable for plastics etc. This is a very cost-effective primer particularly for the high-end finish formulation.
Requires 2K hardener. When spraying 2K paints you must use a hardener/catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
| Hardener | TH720 |
| Mix | 30% |
| Thinners | DT1150 |
| Volume Solids | 74% |
| Spreading Rate | 12m²/litre |
| Surface Dry | 1 hour at 23°C |
Surface Preparation
Apply to thoroughly clean, dry and dust free substrates.
Typical Paint System
Maximum of two coats of TU574.
Published: March 6, 2018
Published: April 20, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023
Published: October 24, 2023
The below products are often purchased together with the above item.
