Product Ref: WO3124
2 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
TU148 is a white pigmented, two pack, polyurethane basecoat. It is a general purpose coating for flat parts and profiles which exhibits a good hiding power also on sharp edges, a good vertical hold when applied with fixed guns and excellent sanding.
A good general purpose primer primarily used for flat parts and profiles. This primer exhibits good hiding power, even on sharp edges and features good vertical hold and excellent sanding with extended pot life over conventional technologies
Requires 2K hardener. When spraying 2K paints you must use a hardener/catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
|Mix||50 - 70%|
|Surface Dry||20 minutes at 23°C|
|Application Method||Spray Gun, Curtain Coater|
|Surfaces||Flat Parts, Fitted Furniture, Doors|
|Maintenance Cycle||Unlimited use- Stir well before use|
|Number of Coats||1-3|
Thorough sanding and cleaning of bare wood.
Typical Paint System
First coat of TU148/13 and then TZ99.
Published: March 6, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.
We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.
Out of stock