• Sayerlack Polyurethane Topcoat Matt - TZ9910
  • WO3137 - 2
  • WO3137 - 3
  • WO3137 - 4
  • WO3137 - 5
  • WO3137 - 7
  • WO3137 - 8

Sayerlack 2Pk Polyurethane Topcoat Matt - TZ99.

Product Ref: WO3137

3 people have viewed this product in the last 24 hours

Options

Add Colour Reference After Adding To Basket

5Kg
£0.00 ex. VAT £0.00 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

Product Description

 

Sayerlack TZ99 2 Pack Top Coat

Sayerlack TZ99 is a premium two pack, pigmented Polyurethane topcoat for coating of any internal surfaces, such as kitchens, cabinetry and furniture. It gives exceptional durability and smoothness of finish for high-end manufacturers, and reduced discolouration from UV light compared to traditional products such as AC. 

  • Excellent opacity
  • Fast drying
  • High build
  • Shelf life un-limited if properly stored
  • Excellent slip and feel
  • Tintable to any colour

TZ99 bases must be applied only if added with solvent-based pastes TP2009.

 

2 Pack Hardener Required

A Polyurethane topcoat with excellent opacity which exhibits fast drying, high build and good surface feel and hardness. Available in an unlimited colour range.

If you are looking for a high durability topcoat which is suitable for use both internally and externally, this Sayerlack polyurethane topcoat may be of interest. With high solids and low volatile organic compounds (VOC), it possesses a chemical agent resistant coating (CARC) and can stand the test of time.

This polyurethane product is intended to be used in tandem with a hardener such as Sayerlack Polyurethane Hardener TH720. It is designed to be mixed in specific amounts prior to being used, before the chemical reaction takes place. Polyurethane topcoat and hardener combinations are able to offer you fast drying properties, very good elasticity, a high level of UV stability, and effective bonding.

You will find that when combined with a hardener, Sayerlack polyurethane topcoat is very versatile, and can therefore be used with a wide variety of coating systems. Among the types of systems are airless, automatic systems, spray guns and curtain coating. Woodwork can benefit from a level of finish which is simply not attainable when using single pack coatings. This is evidenced by the superior hardness, mechanical strength and protection which is offered by the Sayerlack polyurethane topcoat.

When it comes to coating furniture - from chairs to cabinets, tables and frames - few products offer the short working times provided by Sayerlack polyurethane topcoat when combined with Sayerlack polyurethane primer.

Technical Detail

Gloss LevelMatt, Semi Matt, Gloss
HardenerTH720
Mix50%
ThinnersDT0040
Volume Solids55%
Spreading Rate9m²/litre
Surface Dry20 minutes at 23°C
Application MethodAir/Airless Spray Guns, Certain Coaters
SurfacesFlat Parts, Profiles, Picture Frames
Maintenance CycleUnlimited use- Stir well before use
Number of CoatsN/A


Surface Preparation
With white or black polyurethane or polyester primer.

Typical Paint System
First coat of TU148 and then TZ99.

Essential Product Information.

Sayerlack Polyurethane Topcoat Matt - TZ9910

We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat