Time Remaining
Product Ref: WO3005/97
2 people have viewed this product in the last 24 hours
In stock
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
TLL3097 is a high-gloss polyurethane topcoat developed to be pigmented to a wide range of opaque colours.
It is best applied by high or low pressure spray or curtain coater, manual application is not advised since it will be harder to achieve the premium finish probably expected. As with most high-gloss products, drying time is deliberately slower to help achieve a flat finish and hence reduce further sanding required.
TH724 can be used to speed up drying, this may result in slightly different finish or opacity, but will still give a good gloss level.
Burnishing by machine is possible to help achieve a full ‘wet-look’ finish if required. This is usually performed after a 3 to 4 day initial curing period; details on suggested process are available on request.
- Very high gloss
- Good pot life
- Very economical topcoat
- Choice of hardeners available: TH724 - fast curing, good for polishing OR; TH735 - slower curing, excellent gloss from gun
Published: March 6, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.
