Product Ref: WO5005
2 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Sayerlack Acrylic Lacquers exhibit complete transparency, good build and smoothness particularly suitable for applications that require high yellowing resistance.
This product cures chemically rather than air drying. We recommend the purchase of Sayerlack Hardener TH790 to compliment this product.
Requires 2K hardener. When spraying 2K paints you must use a hardener/catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
Versions: 5, 10, 15, 25, 40, 50 gloss, 90 high-gloss
Area of use: Flat parts and turned parts
Method of use: Curtain coater, spray gun
Part A:TZ70**/00 100
Part B (hardener): TH0790/00 10
Thinner: by weight (kg) DT1150/00 30-50
Solids content (%):
10, 25 gloss 30 ± 1
5, 15, 40, 50 gloss 28 ± 1
90 gloss 27 ± 1
Specific gravity (kg/l): 0.920 ± 0.030
Viscosity (DIN 4 at 20°C): Part A: 48" ± 3" A+B: 35" ± 3"
With acrylic basecoat TU0054/00.
Pot-life: 6 hours
The below products are often purchased together with the above item.
We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.
Out of stock