• Ultrimax Acid Catalysed Clear Lacquer - Dead Matt

Ultrimax Acid Catalysed Clear Lacquer Dead Matt

Product Ref: WO2015BS

7 people have viewed this product in the last 24 hours

Options
5 Litre
£30.95 ex. VAT £37.14 inc. VATRRP: £0.00
View Favourites

In stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

 

Ultrimax Acid Catalysed Clear Lacquer - Bar Top Lacquer

A high quality, two component acid catalysed lacquer for wood when high durability is required. This product has a good pot life is suitable for a wide range of applications including contract and domestic use.

A quick drying, extra high build acid-catalyst lacquer formulated to provide outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Ideal for areas of particularly high use, such as bars and pubs. Better known as 'bar-top lacquer'.

 

Chemically Cured

Acid Catalsyed is chemcially cured rather than air dried so we recommend you also buy our Acid Catalyst with this product.

 

Hardener ** IMPORTANT NOTE

Requires 2K hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.

Technical Detail

MATT

PHYSICAL PROPERTIES

MIXING RATIO: 10 : 1 v/v 13900 catalyst
COLOUR: Clear
GLOSS: 30%
VISCOSITY: 31-33 Sec B4 @ 20°C
VOC CONTENT: 541 grams/litre (without catalyst)
WEIGHT SOLIDS: 44%
FLASH POINT: Below 22°C
POT LIFE: up to 24hours recommended
COVERAGE: 12m2 per litre.

FILM THICKNESS WET FILM THICKNESS: 80 microns

DRY FILM THICKNESS: 25 microns

 

GLOSS

PHYSICAL PROPERTIES

MIXING RATIO: 10 : 1 v/v 13900 catalyst
COLOUR: Clear
GLOSS: 30%
VISCOSITY: 31-33 Sec B4 @ 20°C
VOC CONTENT: 541 grams/litre (without catalyst)
WEIGHT SOLIDS: 44%
FLASH POINT: Below 22°C
POT LIFE: up to 24hours recommended
COVERAGE: 12m2 per litre.

FILM THICKNESS WET FILM THICKNESS: 80 microns

DRY FILM THICKNESS: 25 microns

 

SATIN

PHYSICAL PROPERTIES

MIXING RATIO: 10 : 1 v/v 13900 catalyst
COLOUR: Clear
GLOSS: 30%
VISCOSITY: 31-33 Sec B4 @ 20°C
VOC CONTENT: 541 grams/litre (without catalyst)
WEIGHT SOLIDS: 44%
FLASH POINT: Below 22°C
POT LIFE: up to 24hours recommended
COVERAGE: 12m2 per litre.

FILM THICKNESS WET FILM THICKNESS: 80 microns

DRY FILM THICKNESS: 25 microns

Essential Product Information.

Ultrimax Acid Catalysed Clear Lacquer - Dead Matt

We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat