Time Remaining
Product Ref: WO2015
4 people have viewed this product in the last 24 hours
Add Colour Reference After Adding To Basket
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
A quick drying, high opacity pigmented range of acid catalyst colours providing outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Products of this type achieve their full resistance properties after 21 – 28 days curing, although careful use is possible before this period.
2 Pack Topcoat system. This product chemically cures rather than air dry. We recommend also purchasing Acid Catalyst with this product.
Requires 2K hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
FILM THICKNESS
Min. 100 - max. 150g/m2
SURFACE PREPARATION With sanded polyurethane or ureic basecoats.
RECOMMENDED TEMPERATURE In particularly hot or humid weather, or in tropical areas, add 1-3% anti-blushing thinner XS0007/00 to prevent blushing and promote flow. To speed up drying use DT1150/00 thinner instead of DS1105/00.
DRYING / OVERCOATING
100 g/m2 at 20°C):
Dust free 10’-15’
Touch dry 60’-70’
Stackable: 6 hours.
Forced ventilation (100 g/m2 ):
Recommended application system:
Flash-off: 20’
At 50°C.: 40’
Cooling: 20’
The below products are often purchased together with the above item.
