• Colormax Ac Topcoat
  • WO2015 2
  • WO2015 3

Colormax Acid Catalysed Topcoat

Product Ref: WO2001

4 people have viewed this product in the last 24 hours

Options

Add Colour Reference After Adding To Basket

1 Litre
£18.01 ex. VAT £21.61 inc. VATRRP: £0.00
View Favourites

In stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

Colormax Acid Catalysed Topcoat

A quick drying, high opacity pigmented range of acid catalyst colours providing outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Products of this type achieve their full resistance properties after 21 – 28 days curing, although careful use is possible before this period.

 

Chemically Cured 2 Pack

2 Pack Topcoat system. This product chemically cures rather than air dry. We recommend also purchasing Acid Catalyst with this product.

 

Hardener ** IMPORTANT NOTE

Requires 2K hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.

Technical Detail

FILM THICKNESS

Min. 100 - max. 150g/m2

 

SURFACE PREPARATION With sanded polyurethane or ureic basecoats.

 

RECOMMENDED TEMPERATURE In particularly hot or humid weather, or in tropical areas, add 1-3% anti-blushing thinner XS0007/00 to prevent blushing and promote flow. To speed up drying use DT1150/00 thinner instead of DS1105/00.

 

DRYING / OVERCOATING

100 g/m2 at 20°C):

Dust free 10’-15’

Touch dry 60’-70’

Stackable: 6 hours.

Forced ventilation (100 g/m2 ):

Recommended application system:

Flash-off: 20’

At 50°C.: 40’

Cooling: 20’

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat