• Ultrithane 2 - Claas Orange
  • IPP203-CAS 2
  • IPP203-CAS 3
  • IPP203-CAS 4
  • IPP203-CAS 5
  • IPP203-CAS 6

Ultrithane 2 - Claas Orange

Product Ref: IPP203-CLO

3 people have viewed this product in the last 24 hours

Options
Options
5 Litre
£84.67 ex. VAT £101.60 inc. VATRRP: £0.00
View Favourites

In stockdelivered within 2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

 

Ultrithane 2 - 2K Paint- Construction & Agri Colours

A high performance two pack acrylic polyurethane finishing coat which offers an outstanding gloss level and excellent durability. Typical uses include agricultural plant and construction equipment, commercial vehicles and metal structural work.

Ideal for fleet and agricultural sprayers with a full range of popular colours available.

Features:

  • Excellent durability
  • Quick curing for fast turnaround projects
  • Ultra high gloss finish
  • Fast drying
  • Excellent colour and gloss retention
  • Ideal for aggressive environments
  • Available in almost any colour
  • Solvent & Chemical resistant

 

Hardener ** IMPORTANT NOTE

Requires 2K hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.

 

Technical Detail

PHYSICAL PROPERTIES

Colours - Any RAL & BS

Pot-life - 4 hours (at higher temperatures pot-life decreases).

Dry film appearance - Glossy

Practical cover rate - 8m²/litre. The cover rate is calculated on the suggested thickness and applied on plane and regular surfaces. NB: Data recorded @ 20°C.(68°F)

 

RECOMMENDED THICKNESS - 40 - 50 µm dry film, waiting 5 - 10 minutes between coats.

PREPARATION

Stir thoroughly to achieve even colour and consistency, then add the suitable:

2parts Paint

1 Part Ultrimax Universal Activator

10-20% Ultrimax Universal Thinners

SURFACE PREPARATION

Iron surfaces Take off any trace of rust, iron scale, grease and moisture by sand-blasting SA2.5 grade; otherwise, carry out a careful mechanical cleaning followed by solvent degreasing. Then apply the primer.

Galvanized steel Remove iron scale and foreign matters. Degrease carefully with organic solvents and apply primer.

Aluminium and light alloys: Chromatising or phosphochromatising treatment; otherwise, slight matting with sandpaper followed by organic solvent degreasing. Next, apply primer.

Essential Product Information.

Ultrithane 2 - Claas Orange

We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat