Time Remaining
Product Ref: BGD502/2
3 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Main Technical Parameters
Normal Packing List
Carrying case
Cross Hatch Cutter & Handle
1 roll of 3M Scotch Transparent Tape
Brush
Magnifier
Certificate of Conformity (if requested)
This instrument is widely used to evaluate the adhesion of various coatings. A highly precise machined wheel presenting 6 or 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 6 cutting edges and comfortable wood handle.
When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.
The Cross Hatch Cutters conforms with the requirements of:
BS 3900 E6; BS/EN ISO 2409; ASTM D 3359 D 3302;
Main Technical Parameters
NormalPacking List
Published: June 29, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021