• Upol Extra Smooth Body Filler - 2.1 Litre
  • FSE034 2
  • FSE034 3

Upol Extra Car Body Filler Smooth - 2.1 Litre Tin with Hardener

Product Ref: FSE034

2 people have viewed this product in the last 24 hours

£39.99 ex. VAT £47.99 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

UPOL Smooth Body Filler 2K

Another addition to the well regarded UPOL brand. Upol Extra polyester car body filler is a two component multifunctional filler paste used for the filling of holes and imperfections in most substrates. Upol Extra has been specially formulated for the professional user and combines good filling and smooth spreading properties together with ease of sanding.


2.1 litre Tin Included with Hardener.


Covers a Range of Filling Situations

Use UPOL EXTRA polyester filler on the following surfaces:-

- Bare metal including Steel, Aluminium and Zinc-coated substrate - degrease and abrade with P80 paper.
- Original paint surfaces (with the exception of thermoplastic acrylics) - degrease and abrade with P180 grit paper.
- GRP - degrease and abrade with P80 grit paper.


Drying & Overpainting

Drying Time: Sandable after 20 mins. at 20°c.
Over Painting: Extra polyester filler can be over-painted with most paint systems includig 2K. Ideally a full system is recommended including primer and two coats of topcoat.


Environmental Body Filler Impact

Our world constantly needs to produce products that are reducing in harm to the wider environment. The VOC content of this product in ready to use form is 100g/litre.

Technical Detail


- Mixing Ratio: 100 parts by weight Extra polyester filler,
- 2 parts by weight U-POL hardener for polyester filler.
- Pot Life: Once mixed, 4-5 minutes at 20°c with 2% hardener.

Key Note to mixing - The exact mixing ratio is not critical, although over or under catalysation may affect the gel time. Do not greatly over catalyse the paste as this will not significantly speed up the gel time and could lead to bleed through and bleaching problems when over-painting later. Staining may also occure where too little hardener is used.

Compare Products (0)