Time Remaining
Product Ref: WO3002
2 people have viewed this product in the last 24 hours
In stock
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
TU0565/00 is a barrier specifically formulated for overcoating with polyester products.
Its most important characteristic is its excellent pore wettability, which is most pronounced in vertical applications with low application weights.
It is therefore the ideal barrier for substrates such as rotary cut mahogany veneer and briar which have deep
and absorbent pores and are highly susceptible to strong air release (zebra-wood, elm, etc.).
It has good insulating power when used on resinous woods, although it is always advisable to run a test to see how many coats are required to achieve the desired result.
Requires 2K hardener. When spraying 2K paints you must use a hardener / Catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
Published: March 6, 2018
Published: May 19, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.
