Product Ref: AS-QF0570030
4 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in HEAD OFFICE - Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
The Graco Airless Manifold Filters, filter the material from the inside to the outside. The inside space is artly filled by a rod which ensures that the material is spread over the full length. The mesh size is the number of filter wires per square inch, the finer the mesh the more wires there are.
The 30 mesh filter is suitable for filtering thicker materals such as masonry paint. If it is used with thicker materials such as intuescent coatings, this may cause an unacceptable pressure drop across the filter and the filter may be removed.
The 60 mesh filter is suitable for filtering medium thickness materials such as emulsion and acrylics. If it is used with thicker materials, this will cause an unacceptable pressure drop across the filter.
The 100 mesh filter is suitable for filtering thin materials such as varnish and gloss. If it is used with thicker materials this will cause an unacceptable drop across the filter.
The 200 mesh filter is suitable for filtering thinner materials such as stains, varhishes, and solvent-based paints. If it is used with thicker matierlas this will cause an unacceptable drop across the filter.
Published: April 20, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023