Product Ref: ALCB4010
4 people have viewed this product in the last 24 hours
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
The Wagner Cobra is a high-pressure double diagragm pump suitable for Airless and AirCoat applications up to 250 bar/3,625 psi. It is the first high-pressure pneumatic pump without packings. the absense of froction in the fluid section and the minimum shear makes it perfect for any kind of material including the most critical ones such as reactive paints or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality.
The Wagna Cobra is the best-selling unit in the AirCoat range:
|Operating Pressure||250 bar, 3626 PSI|
|Volumetric Flow per Double Stroke||10 cm³/DS, 0,61 in³/DH|
|Max. Stroke Rate||200 DS/min|
|Min. Air Inlet||Ø19 mm, 0.7 in|
|Material Inlet||M–M 36 × 2|
|Material Outlet||M–G 3/8‘‘|
|Air Inlet Connection||F–G 1/2‘‘|
|Air Inlet Pressure||2,5 – 6, bar, 36 – 87 PSI|
|Max. Sound Level||76 dB(A)|
|Material Temperature||10 – 80°C, 50 – 176.0 °F|
|Ambient Temperature||10 – 60°C, 50 – 140 °F|
|Material pH||3,5 – 9,0 pH|
|Max. Material Pressure at Pump Inlet||20 bar, 290 PSI|
|Weight||19,0 kg, 41.9 lb|
Published: April 20, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
The below products are often purchased together with the above item.