Product Ref: IPJPT20G
3 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Paints Tankguard Storage is a two component polyamine cured novolac epoxy coating that is a specially designed tank lining with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
Jotun Paints Tankguard Storage is specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List.
Tankguard Storage provides corrosion protection for the internal lining of steel storage tanks. It is resistant to a wide range of chemicals including, but not limited to, crude oil and aromatic and aliphatic solvents and others.
Jotun Tankguard Storage is a two component polyamine cured novolac epoxy coating that is a specially designed tank lining with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Jotun Tankguard Storage is specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List.
Holding primer
When there is a need for a temporary protection of the blasted steel Tankguard Storage can be used in a system with Tankguard Holding Primer as the first coat.
For Use On - Carbon Steel, Galvanized Steel, Stainless Steel, Concrete
Application Method - Brush, Roller, Spray
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - Approved to UK Defence Standard 80-97 isue 5, annex G for resistance to Avcat F-44 aviation fuel, Approved for PSPC COT
Pack Size - 18.8L
Application - Brush,
Spray - Coverage - 6.3 - 3.2 m²/l
Coverage - 3.2 to 6.3m² per litre
Recommended Thinner/Cleaner - Jotun Thinner No. 23
Density - 1.6 kg/l
Solids by Volume - 63 ± 2 %
VOC - 337 g/l
Touch Dry - 4 hours
Recommended Dry Film Thickness - 100 - 200 μm
Recommended Wet Film Thickness - 160 - 320 μm
UN Number (Activator) - UN1263
UN Number (Base) - UN2735
Pot Life - 4 hours at 23°C
Published: April 20, 2018
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
The below products are often purchased together with the above item.