Jotun Paints Tankguard DW - Light Grey
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Tankguard DW - 2K Paint
Jotun Tankguard DW is a two component solvent free amine cured epoxy coating that is specially designed for drinking water tanks. It can be used as a primer and finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.
Jotun Tankguard DW is to be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage.
Approvals and certificates
- Approved to BS 6920-1:2000 for contact with potable water.
- Approved by the Norwegian Institute of Public Health for use in contact with potable water.
- In compliance with Federal Drug Authority, USA, FDA Title 21, Part 175.300, approved for exposure to dry foods.
- Meets the requirements of ANSI/AWWA standard C210-07. Suitabilty for water pipelines.
Jotun Paints Tankguard Storage
Jotun Paints Tankguard Storage is specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List.
Tankguard Storage Features & Benefits
- Chemical resistant paint
- Resistant against crude oil up to 90°C
- Application of two coats in one day
- Flexible dry film thickness range 125 - 200 μm
High solids tank coating with high temperature resistance
Tankguard Storage provides corrosion protection for the internal lining of steel storage tanks. It is resistant to a wide range of chemicals including, but not limited to, crude oil and aromatic and aliphatic solvents and others.
Jotun Paints Certificates and approvals
- Approvals for Aviation Fuel and food contact
- Approved for PSPC COT
When there is a need for a temporary protection of the blasted steel Tankguard Storage can be used in a system with Tankguard Holding Primer as the first coat.
For Use On - Carbon Steel, Stainless Steel, Concrete
Application Method - Brush, Spray
Sheen - Gloss
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - Approved to BS 6920-1:2000 for contact with potable wate
Pack Size - 15L
Application - Brush, Spray
Coverage - 2.5 to 6.7m² per litre
Density - 1.4 kg/l
Solids by Volume - 100%
VOC - 2 g/l
Shelf Life (from date of manufacture) - 12 months
Touch Dry - 10 hours
Recommended Dry Film Thickness - 150 - 400 μm
Recommended Wet Film Thickness - 150 - 400 μm
UN Number (Activator) - UN3066
UN Number (Base) - UN3082
Pot Life - 30 minutes at 23°C
Other Customers Also Bought:
The below products are often purchased together with the above item.