• Jotun Tankguard 412 - Red
  • IPJT412 2
  • IPJT412 3
  • IPJT412 4

Jotun Tankguard 412 - Epoxy Paint - Red

Product Ref: IPJT412

2 people have viewed this product in the last 24 hours

15 Litre
£291.34 ex. VAT £349.61 inc. VATRRP: £0.00
View Favourites

In stock2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description


Jotun Tankguard 412 - 2K Epoxy Paint

Jotun Tankguard 412 is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining with good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.


Areas of Use

Marine: Jotun Tankguard 412 can be used as a coating for potable water, grey water and crude oil tanks.
Protective: Jotun Tankguard 412 is recommended as an internal lining for offshore, onshore and buried tanks and pipes. Refer to Protective Product Resistance List. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.


Price Promise On Jotun Paints 2 Pack

Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?


Approvals and certificates

  • Tested in acordance to AS/NZS 4020:2005, testing of products for use in contact with drinking water.
  • Approved by the Norwegian Institute of Public Health for use in contact with potable water.
  • Compliant for large tanks with ANSI/NSF standard 61 - 2007a, drinking water systems components.


Technical Detail


For Use On - Carbon Steel, Galvanized Steel, Stainless Steel, Concrete

Application Method - Brush, Spray

Sheen - Gloss

Colour - Standard / Ready Mixed

VOC Levels - Low (50-149 g/l)

Single, Two or Three Pack - Two-Pack

Pack Size - 15L

Application - Brush, Spray

Coverage - 2 to 6.5m² per litre

Density - 1.5 kg/l

Solids by Volume - 98 ± 2 %

VOC - 140 g/l

Touch Dry - 6 hours

Recommended Dry Film Thickness - 150 - 500 μm

Recommended Wet Film Thickness - 150 - 500 μm

UN Number (Activator) - UN2735

UN Number (Base) - UN3082

Pot Life - 1 hour at 23°C

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK