Product Ref: IPDE15
2 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in HEAD OFFICE - Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Ultriprime 2K Etch Primer is a two part etch primer designed for pre-treating aluminium or galvanised metal. Applied as an undercoat to ferrous and non-ferrous metals, Ultriprime 2K Etch Primer will not only improve the bond of subsequent topcoats of paint, it will also line the surface with short-term corrosion inhibiting properties.
Mix in equal parts with curing thinners to provide excellent adhesion to all substrates. Ideal for rail and energy applications.
Requires 2K etch chromate free hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.
For application on ferrous and non-ferrous metals to improve the adhesion of subsequent coats of paint. Possesses short-term corrosion inhibiting properties
Colours: Transparent Yellow
Flash Point: 10ºC
VOC: Less than 780 g/l
Gloss level: Matt
Published: December 15, 2016
Published: April 20, 2018
Published: June 29, 2020
Published: October 15, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023