Jotun Penguard HB Primer Undercoat Paint - White | Ultrimaxstore.com

Product Ref: IPPH05W

3 people have viewed this product in the last 24 hours

5 Litre
£63.19 ex. VAT £75.83 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy paint designed as a high build, all purpose coating for new construction. Can be used as a primer paint, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable as a metal primer paint for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.

 

 

Penguard HB Primer - The Undercoat Paint

 

Jotun Penguard HB is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.

 

 

Anti-Corrosive 2 Pack Primer


An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.

Watch the video on the difference between 1pack vs 2pack

 

 

Colours


White, Red, Grey

 

Other Penguard Undercoat Paints for Steel


Other variants available

Penguard Express ZP

Penguard FC

Penguard Express 

Penguard Express MIO

Penguard Express CF


Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment.
Refer to separate TDS for each variant

 

Jotun Primer Application methods


The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.

Tips on How to Spray Paint 

 

Difference between Air Assisted, Airless and Electrostatic Painting

 

Thinners / Cleaning solvent to use with Metal Primer Paint


Thinner: Jotun Thinner No. 17 - view product

 

Undercoat Paint to TopCoat Product compatibility


Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact Ultrimax for specific system recommendations.

Previous coat: inorganic zinc silicate shop primer, epoxy, epoxy mastic, zinc epoxy, zinc silicate, organic shop primer

Subsequent coat: acrylic, epoxy, polyurethane, polysiloxane

 

 

Film Thickness Guide

See Technical Data Sheet attached to this page 

  • Dry Film Thickness - 80

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat