Any Orders Now Placed Will Be Delivered After Easter
Any Orders Now Placed Will Be Delivered After Easter
Product Ref: IPPH05G
5 people have viewed this product in the last 24 hours
In stock
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy paint designed as a high build, all purpose coating for new construction. Can be used as a primer paint, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable as a metal primer paint for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
Jotun Penguard HB is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.
White, Red, Grey
Other variants available
Penguard Express ZP
Penguard FC
Penguard Express
Penguard Express MIO
Penguard Express CF
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment.
Refer to separate TDS for each variant
The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.
Thinner: Jotun Thinner No. 17
Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact Ultrimax for specific system recommendations.
Previous coat: inorganic zinc silicate shop primer, epoxy, epoxy mastic, zinc epoxy, zinc silicate, organic shop primer
Subsequent coat: acrylic, epoxy, polyurethane, polysiloxane
See Technical Data Sheet attached to this page
For Use On - Steel, Stainless Steel, Aluminium, Concrete, Galvanised Steel
Application Method - Brush, Spray
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Pack Size - 5L
Application - Brush, Spray
Coverage - 3.6 to 6.8m² per litre
Touch Dry - 2.5 hours
UN Number - UN1263
Published: April 20, 2018
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023
Published: October 24, 2023
The below products are often purchased together with the above item.