• Jotun Penguard Express ZP Primer - Red
  • IPTPX05R - 2
  • IPTPX05R - 3

Jotun Penguard Express ZP Metal Primer Paint - Red 5ltr

Product Ref: IPTPX05R

5 people have viewed this product in the last 24 hours

Options
5 Litre
£0.00 ex. VAT £0.00 inc. VATRRP: £0.00
View Favourites

In stock2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

Product Description

 

Jotun Penguard Express ZP Primer

Jotun Penguard Express ZP Primer is a fast drying, high solids, two pack zinc phosphate pigmented epoxy coating which may be applied in high film thickness and at lower temperatures.

For use as an anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.

 

Anti-Corrosive 2 Pack Primer

An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.

 

Penguard Express ZP Product description

A fast drying, high solids, two pack zinc phosphate pigmented epoxy coating which may be applied in high film thickness and at lower temperatures.

For use as an anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.

 

Approvals and certificates

Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.

Tested in accordance with ISO 12944-5, C5-High environment

 

Colours

grey, red

 

Other Penguard Undercoat Paints for Steel

Other variants available
Penguard Express
Penguard Express MIO
Penguard Express CF
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment.
Refer to separate TDS for each variant

 

Jotun Primer Application methods

The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.

 

Thinners / Cleaning solvent to use with Metal Primer Paint

Thinner: Jotun Thinner No. 17

 

Undercoat Paint to TopCoat Product compatibility

Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact Ultrimax for specific system recommendations.

Previous coat: inorganic zinc silicate shop primer, epoxy, epoxy mastic, zinc epoxy, zinc silicate, organic shop primer
 

Technical Detail

Manufacturer - Jotun

For Use On - Steel, Shop Primed Steel

Application Method - Airless Spray, Brush

Sheen - Matt

Colour - Standard / Ready Mixed

Single, Two or Three Pack - Two-Pack

Product Certifications - Network Rail Line Specification NR/L3/CIV/039

Pack Size - 5L, 20L

Coverage - 3 to 9.9m²/l

Touch Dry - 1 hour

UN Number (Activator) - UN1263

UN Number (Base) - UN1263

Videos

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK