Jotun Penguard Express Primer - MIO - Grey
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun 2K Paint Penguard Express MIO Metal Primer Paint
Jotun Penguard Express MIO is a fast drying metal primer paint, high solids two pack micaceous iron oxide pigmented epoxy coating which may be applied in high film thickness and at lower temperatures.
The iron oxide pigmentation provides an extra layer of rust protection over similar products such as Penguard Express.
For use as an anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and dry-to-handle times are desired.
Can be used alone or in various systems of primers & topcoats.
Suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates. It can be applied at sub zero surface temperatures.
Jotun Penguard Express MIO is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Anti-Corrosive 2 Pack Primer
An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.
Penguard Express MIO Product description
This is a two component amine cured epoxy coating. It is a fast drying, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a metal primer paint, mid coat, finish coat or as single coat system in atmospheric environments where a lower temperature can be expected.
Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero
Approvals and certificates
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
Tested in accordance with ISO 12944-5, C5-High environment.
Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, N4 and N9 (Cert. No. XM92/M20-140, M20-179, XM92-162, XM92-163, XM92/M20-166, XN90/N4-077, N4-102, XN90-084, XN90-085, XN90/N4-090, XN90/N9-065, XN90/N9-066) Item 7.2.2.
Other Penguard Undercoat Paints for Steel
Other variants available
Penguard Express ZP
Penguard Express CF
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
Refer to separate TDS for each variant
Jotun Primer Application methods
The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.
Thinners / Cleaning solvent to use with Metal Primer Paint
Thinner: Jotun Thinner No. 17
- Solids - 74%
- VOC - 230gms/litre
- Spreading rate - 5.9sqm/ltr
- Gloss - Matt
- Thinners - No.17
Manufacturer - Jotun
Water / Solvent Based -Solvent
For Use On -Steel, Galvanized Steel, Shop Primed Steel, Aluminium, Concrete
Application Method - Airless Spray, Brush
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - Network Rail Line Specification NR/L3/CIV/039
Pack Size - 5L
Application - Brush, Spray
Coverage - 3 to 9.9m² per litre
Touch Dry - 1 hour
UN Number (Activator) - UN1263
UN Number (Base) - UN1263