Product Ref: IPTPX05M
2 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Penguard Express MIO is a fast drying metal primer paint, high solids two pack micaceous iron oxide pigmented epoxy coating which may be applied in high film thickness and at lower temperatures.
The iron oxide pigmentation provides an extra layer of rust protection over similar products such as Penguard Express.
For use as an anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and dry-to-handle times are desired.
Can be used alone or in various systems of primers & topcoats.
Suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates. It can be applied at sub zero surface temperatures.
Jotun Penguard Express MIO is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
This is a two component amine cured epoxy coating. It is a fast drying, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a metal primer paint, mid coat, finish coat or as single coat system in atmospheric environments where a lower temperature can be expected.
Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero
surface temperatures.
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
Tested in accordance with ISO 12944-5, C5-High environment.
Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, N4 and N9 (Cert. No. XM92/M20-140, M20-179, XM92-162, XM92-163, XM92/M20-166, XN90/N4-077, N4-102, XN90-084, XN90-085, XN90/N4-090, XN90/N9-065, XN90/N9-066) Item 7.2.2.
grey
Other variants available
Penguard Express
Penguard Express ZP
Penguard Express CF
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment.
Refer to separate TDS for each variant
The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.
Thinner: Jotun Thinner No. 17
Manufacturer - Jotun
Water / Solvent Based -Solvent
For Use On -Steel, Galvanized Steel, Shop Primed Steel, Aluminium, Concrete
Application Method - Airless Spray, Brush
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - Network Rail Line Specification NR/L3/CIV/039
Pack Size - 5L
Application - Brush, Spray
Coverage - 3 to 9.9m² per litre
Touch Dry - 1 hour
UN Number (Activator) - UN1263
UN Number (Base) - UN1263
Published: April 20, 2018
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
The below products are often purchased together with the above item.