Jotun Jotamastic Plus - Aluminium
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Jotamastic Plus is a two-pack amine cured epoxy mastic coating that is surface tolerant, high solids and high build. It is specially designed for areas where optimum surface preparation is not possible or desired. Provides long-lasting protection in environments with high corrosivity and can be used as a primer, mid-coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces.
Features & Benefits of Jotamastic Plus
- Very good surface tolerance
- Fast curing
- Has a wide DFT range
Common Areas of Use:
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Technical Information for Jotamastic Plus
- Solids - 72%
- Gloss Level - Semi-gloss
- Flash point - 35c
- VOC - 256 g/l
Application for Jotamastic Plus
Due to the high surface tolerance of Jotamastic Plus, it can be applied onto very poorly prepared surfaces. This means that where other coatings will fail and not adhere properly to the surface, Jotamastic 90 can be applied and it will still provide very good protection.
If applying the jotamastic plus by spray application, use an airless spray system. Brush and roller can be used but take care to achieve the correct film thickness. It isn't recommended to use a roller when applying the first primer coat.