Time Remaining
Product Ref: IPJ905B15
7 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
This is a two-component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion-resistant, high solids, high build product. It is an aluminium pigmented product. Specially designed for areas where optimum surface preparation is not possible or desired.
Provides long-lasting protection in environments with high corrosivity. Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces.
It can be applied at sub-zero surface temperatures. Small colour variations may occur when changing between the two curing agents.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
Approved to meet the requirements of UK Highway Agency Item 115 for use on bridges and highway infrastructure.
Due to the high surface tolerance of Jotamastic 90 Alu B15, it can be applied onto very poorly prepared surfaces. This means that where other coatings will fail and not adhere properly to the surface, Jotamastic 90 can be applied and it will still provide very good protection.
If applying the jotamastic 90 Alu B15 by spray application, use an airless spray system. Brush and roller can be used but take care to achieve the correct film thickness. It isn't recommended to use a roller when applying the first primer coat.
Technical Information
For Jotatmastic 90 Alu B15
