• Jotun Jotacote Universal N10 - Grey
  • IPJC20G-N10 2

Jotun Paints Jotacote Universal N10 - Grey

Product Ref: IPJC20G-N10

3 people have viewed this product in the last 24 hours

Options
20 Litre
£226.04 ex. VAT £271.25 inc. VATRRP: £0.00
View Favourites

In stock2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

 

Jotun Paints Jotacote Universal N10 Primer

Jotun Jotacote Universal N10 is a two-pack pure epoxy coating that is fast drying, abrasion-resistant, high solids, and it is a high build product. Specially designed to be a universal, building coating where very fast drying times are needed. It is best suited for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrates. It can be applied at sub-zero surface temperatures.

 

Price Promise On Jotun Paints 2 Pack

Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?

 

Typical Uses for Jotacote Universal N10

Jotun Jotacote Universal N10 is typically used in marine environments, including outside hulls, superstructures, decks, cargo holds and water ballast tanks. Jotun Jotacote Universal N10 has very good flexibility making it suitable for the temperature variation experienced in crude oil, chemical and shuttle tankers.

Features and Benefits

  • It has full universality so it can be used in a lot of environments and times of the year
  • It has lower VOC's than some other alternatives
  • Fast-drying even in low temperatures and can easily be applied in lower temperatures
  • Good application on low profile and non-ferrous substrate

Approvals and Certificates

  • Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
  • Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87)
  • Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics.

Application of Jotun Jotacote Universal N10

Due to the universality of the product, it can be applied to various surfaces and substrates. These include carbon steel, stainless steel, aluminium, galvanised steel, shop primed steel, and coated surfaces.

Jotacote Universal can be applied using airless spray, brush, or roller. For brush and roller application it is only recommended for small areas and when applying the coating, take care to achieve the recommended film thickness. It is not recommended to use a roller for the first primer coat.

 

Technical Detail

 

Manufacturer - Jotun

For Use On - Aluminium, Carbon Steel, Galvanized Steel, Shop Primed Steel, Stainless Steel

Application Method - Brush, Roller, Spray

Sheen - Matt

Colour - Standard / Ready Mixed - Single, Two or Three Pack

Two-Pack - Product Certifications

Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82), Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87), Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics

Pack Size - 20L

Application - Brush, Roller, Spray

Coverage - 2.4-9.6m² per litre

Touch Dry - 2 Hours

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat