Product Ref: IPB751
2 people have viewed this product in the last 24 hours
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
A 2k primer zinc rich epoxy primer. Complete with a high zinc content that complies with the compositional requirements for SSPC paint 20, level 2 and ISO 12944. For use as a zinc primer on blast cleaned steel. Jotun Barrier is used in combination with advanced coating systems to further improve protection against corrosion.
Available as a 4ltr or 9ltr Tin Ultrimax is a UK supplier with immediate dispatch.
Jotun Barrier is a well proven zinc rich or zinc primer epoxy primer designed for coating systems where extended durability and excellent corrosion protection are required. This two component polyamide cured zinc rich epoxy coating has high zinc dust content.
Barrier is a 2K primer, zinc rich, epoxy primer, used as a first coat on blast cleaned steel. The steel must be prepared to SA2.5 using dry blasting (not water jetting).
Suitable for structural steel & piping to be exposed to highly corrosive environments (C5I or C5M).
When used in combination with Jotamastic 80 or Jotamastic 87 (the forerunner to Jotamastic 90) , there will be a further improvement in corrosion protection.
One coat is recommended at a typical spreading rate of 7 sq. metres per litre.
Barrier can be overcoated in 2 hours at 10°C.
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. Complies with ASTM D520 type II zinc dust.
Manufacturer - Jotun
Water / Solvent Based - Solvent
For Use On - Steel
Application Method - Airless Spray, Brush
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - NORSOK M-501, Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, Low Flame Spread in accordance with EU Directive for Marine Equipment
Coverage - 4.2 to 21.2m²/l
Touch Dry - 1 Hour
UN Number (Activator) - UN1263
UN Number (Base) - UN1263
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021