Product Ref: IPB080
2 people have viewed this product in the last 24 hours
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?
This is a two-pack polyamide cured zinc-rich epoxy paint coating. It is a high solids, high zinc dust containing product. Jotun Barrier 80 also conforms to the requirements of SSPC paint 20, level 2 and ISO 12944-5. It provides very good corrosion protection as part of a complete coating system. It is to be used as primer in atmospheric conditions.
Typical Uses for Jotun Barrier 80
Jotun Barrier 80 is suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.
Desinged for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2) it is a brilliant product to use for the protection of substrates in harsh environments. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where durability is required.
Tested in accordance with ISO 12944-6, high expected durability in corrosivity category C5-I
Spray: Use airless spray
Brush: Recommended for small areas. Take care to meet the required film thickness
Here at Ultrimax Coatings, we recommend that all users store their Jotun Barrier 80 inline with the national regulations. Regulations include keeping the product away from heat and ignition sources, and storing the pots in well ventilated, cool and dry areas. Remember to always keep the lid of the container tightly closed.
Ideally this product should be used by professionals only, or under close supervision. We recommend you always wear the correct safety gear and PPE when mixing, stirring and applying this product.
Other tips to follow include:
- Always use the product under well ventilated conditions
- Do not inhale any mist from the spray
- Avoid skin contact and use soap and water (or a suitable cleanser) if spillage on the skin occurs
The Jotun Group is a leading manufacturer of high-performance coatings supplied in the UK by Ultrimax Coatings who are proud to be a jotun paint supplier and distributer. Jotun has 37 production plants in 21 countries and is now represented in over 100 countries worldwide. Jotun paints have been used on the Southern Cross Railway Station in Melbourne, the Kingdom Centre in Riyadh and even on the Eiffel Tower in Paris. From topcoats in moist conditions, such as Hardtop Flexi and Pioner Topcoat, through to a wide range of epoxy coatings such as Jotamastic 90 and also paint thinners for all coatings. Jotun Paints are specialists in products used in extreme environments like the Jotun Barrier 80 that is designed for extreme corrosive environments.
Manufacturer - Jotun
Water / Solvent Based - Solvent
For Use On - Steel
Application Method - Airless Spray, Brush
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - ISO 12944-6
Coverage - 6.8 to 15.3m²/l
Touch Dry - 10 mins
UN Number (Activator) - UN1263
UN Number (Base) - UN1263
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
The below products are often purchased together with the above item.