• Ultrithane 2 - Gloss - Bs. 00a01
  • IPP203-00A01 2
  • IPP203-00A01 3
  • IPP203-00A01 4

Ultrithane 2 Gloss Satin Matt - 2K Paint - Gloss - BS. 00A01

Product Ref: IPP203-00A01

5 people have viewed this product in the last 24 hours

Colour

Choose Colour

Current colour: Ash grey / Oyster grey / Portland (BS. 00A01)

£84.67 ex. VAT £101.60 inc. VATRRP: £0.00
View Favourites

In stockdelivered within 2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

Ultrithane 2 Gloss Satin or Matt - 2K Paint

A high performance two pack acrylic polyurethane finishing coat which offers an outstanding gloss level and excellent durability. Typical uses include agricultural plant and construction equipment, commercial vehicles and metal structural work.

 

Ordering Different Gloss Levels - Online

Ordering Gloss Levels: To order Gloss, Satin or Matt versions of this product - 1. Use the colour picker to choose your colour - 2. Add products to basket - 3. Advise in the basket comments near payment what gloss level you would like for each tin. Example.

'2 tins RAL 9010 in Satin. // 1 tin RAL 9005 Gloss'

 

Highly Durable Metal Paint

Ultrithane 2 is a highly durable 2k paint with high gloss levels. This makes it a superb metal paint for industries such agricultural, plant and machinery or even container sprayers if choosing the satin / gloss level.

 

Features:

  • Excellent durability
  • Slightly slower drying but not significant for most sprayers
  • Quick curing for fast turnaround projects
  • Ultra high gloss finish
  • Fast drying
  • Excellent colour and gloss retention
  • Ideal for aggressive environments
  • Available in almost any colour
  • Solvent & Chemical resistant
  • Available in Gloss*, Satin* or Matt* levels - (*When you order at basket stage add to cmments your preferred gloss level)

 

Hardener ** IMPORTANT NOTE

Requires 2K hardener. When spraying 2K paints you must use a hardener with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or cancel the box to add to basket without the hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.

Technical Detail

 

PHYSICAL PROPERTIES

Colours - Any RAL & BS

Pot-life - 4 hours (at higher temperatures pot-life decreases).

Dry film appearance - Glossy

Practical cover rate - 8m²/litre. The cover rate is calculated on the suggested thickness and applied on plane and regular surfaces. NB: Data recorded @ 20°C.(68°F)

 

RECOMMENDED THICKNESS - 40 - 50 µm dry film, waiting 5 - 10 minutes between coats.

PREPARATION

Stir thoroughly to achieve even colour and consistency, then add the suitable:

2parts Paint

1 Part Ultrimax Universal Activator

10-20% Ultrimax Universal Thinners

SURFACE PREPARATION

Iron surfaces Take off any trace of rust, iron scale, grease and moisture by sand-blasting SA2.5 grade; otherwise, carry out a careful mechanical cleaning followed by solvent degreasing. Then apply the primer.

Galvanized steel Remove iron scale and foreign matters. Degrease carefully with organic solvents and apply primer.

Aluminium and light alloys: Chromatising or phosphochromatising treatment; otherwise, slight matting with sandpaper followed by organic solvent degreasing. Next, apply primer.

Essential Product Information.

Ultrithane 2 - Gloss - Bs. 00a01

We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat