We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Hardtop Flexi is a chemically curing aliphatic acrylic polyurethane coating suitable for use as a topcoat in atmospheric conditions. In marine environments, this product is recommended for container deck, superstructure and topside applications. It’s also suitable for refineries, offshore environments, bridges, buildings and power plants. If you work in any of these settings, it’s also worthwhile noting that Jotun Hardtop Flexi can be used on a wide selection of industrial structures too.
A two component, high solid, compliant, flexible polyurethane coating with good gloss and colour retention.
Hardtop Flexi can be used as a single coat system in atmospheric corrosivity classes C2 and C3. Can also be used as a
topcoat in classes C2 - C4 and C5-I and C5-M on various primers and as maintenance coating on old paint surfaces.
Hardtop Flexi has a good impact resistance and painted objects can be stacked after short drying time.
The product have built in good corrosion protection and is also suitable as a single product system for maintenance
application when both corrosion protection and topcoat performance are desired.
With Low VOCs, application of single coats up to 150 microns and fast drying add to the special features of Hardtop Flexi. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Approvals & Certificates
Hardtop Flexi is also suitable for concrete, GRP, wood and when applied above water.
What to consider before purchasing Juton Hardtop Flexi
Hardtop Flexi is resistant to spills of aliphatic petroleum products, most oils and chemicals that are non-aggressive. Here at Ultrimax Store, we recommend storing this aliphatic acrylic polyurethane solution in accordance with the n
Published: June 29, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021