Ultrimax Upvcpro 1k Spray Paint
Product Ref: IPPIT025
5 people have viewed this product in the last 24 hours
Add Colour Reference After Adding To Basket
No rating yet
Write a review
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Ultrimax Upvcpro 1k Spray Paint - Window And Door Refinish
PVC Pro is specifically developed to adhere to uPVC substrates to renovate window frames, conservatories and doors. This product was also designed to be “Ready for Use”, allowing it to be applied straight from the tin by spray applying.
Surface should be suitably prepared using a degreaser or surface cleaner. PVC Pro performs very well when coating window frames, reducing the risk of window seals adhering to the coating.
Spray Paint For Plastic Advantages
- Highly Flexible
- Choose any RAL, BS or Retail colour (simply add to basket and then type in the colour you need)
- Designed specifically for UPVC
- 1K paint no need for hardeners
- Good long term durability
- Quick drying
- Available in gloss, satin or matt finish
- UV resistant – perfect for Conservatories and Patio Doors
- Resistant to Abrasion – ideal for doors and window frames
- Extremely colour stable
- Perfect Spray Paint for Plastic
Safer To Use - Specially Designed As A Spray Paint For Plastic
1K paint ensures that when spraying outside harmful isocyanates found mainly in 2K paint do not infiltrate the local area affecting human / animal life or neighbouring properties. 1K is also less harmful to you the sprayer and less problematic to spray, as standard gas cartridge masks are all that would be required to safely adminster the coating whereas 2K paint would require a full airfed system.
10.5 square metres per litre @ 20 microns dft
Store between 5°C - 25°C. When not in use, cans must be kept sealed
12 months from delivery date in original sealed containers
Maximum VOC Content
2004/42 IIB (E) 840
Available in a wide colour range including RAL & BS and Decorative retail shades
Ensure surfaces to be coated are dry and must be cleaned using the appropriate Ultrimax product to remove all traces of contaminants. Ultrimax produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process.
Please refer to Knowledge Base for details on Surface Preparation. HMG produce Prep Clean 2805 & 2806 for use on new & old substrates
Health & Safety
- Refer to SDS and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
PVC Pro is also available in a limited colour range with special heat reflective pigmentation, please ask for further details.
Which Spray Booth Do I Need? (Dry Filter, Water Wash or Inflatable!)
Published: June 29, 2020
Ultrimax Coatings July 2021 - Newsletter
Published: June 24, 2021
How to Get The Best Out Of The New Ultrimax Coatings Website
Published: July 2, 2021
Ultrimax Coatings Supports Doncaster Foodbank - Local Community Update
Published: July 27, 2021