• Black Bitumen Paint
  • BIT005 2
  • BIT005 3
  • BIT005 4
  • BIT005 6

Black Bitumen Paint - 5ltr Marine, Steel, Concrete

Product Ref: BIT005

2 people have viewed this product in the last 24 hours

5 Litre
£29.95 ex. VAT £35.94 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

 

Black Bitumen Paint

 

black bitumen paint like black jack

Black Bitumen Paint is general purpose paint for waterproofing and the weather protecting of steelwork and concrete.

A solvent based, general purpose, bituminous black paint for waterproofing and weather protecting of steelwork, asphalt, wood and concrete. When dry it forms an odourless and taint-free bitumen film.

 

Ideal Bitumen Paint Uses

Black Bitumen Paint forms a waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. Black bitumen paint is ideal for use as a traditional boat hull protection paint.

It is suitable for application to a wide variety of surfaces including steel, iron, lead, zinc, aluminium, concrete, stone and brick but is mainly used for the following:

  • Metal protection for any type of exterior metalwork - fire escapes, ladders, gutters etc
  • A protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces
  • Marine hulls under the water for full protection

 

Any Colour As Long As Its Black!

In true Henry Ford style Balck bitumen paint comes in any colour as long as its black.

Colour - Black, shiny coating when dry - dulls with exposure to sulight.

black bitumen paint like black jack

Paint Coverage & Application

The coverage per litre is dependant upon the porosity of the surface. For metal and smooth surfaces 10m2 per litre per coat should be obtained. On porous surfaces coverage will be considerably less.

Can be applied by brush or airless spray, apply evenly and ensure no pooling of product. A minimum of two coats of Black Bitumen Paint is recommended.

All surfaces must be free from oil, dirt, dust and loose debris. On metal surfaces all loose rust should be removed using a wire brush and where advanced signs of corrosion are evident the area must be treated with a rust inhibitor. A miminum of two coats of Black Bituminous Paint should be applied, the first coat being allowed to dry before the second is applied.

On porous surfaces where the surface being treated is porous, an initial coat of Primer should be applied.

 

Technical Detail

 

VOC Details: EU Limit for this product CAT. 2(i) : 500g/l (2010). This product contains max. 400g/l VOC’s

Storage Conditions: Store away from children. Containers must be kept sealed and stored under cover away from sources of heat and ignition. Do not allow water to contaminate the product.

Storage Life: Indefinite in undamaged, tightly sealed containers.

Cleaning Tools: Tools may be cleaned with White Spirit. Minor spillages should be wiped off surfaces before the compound has set. Major spillages should be mopped up immediately with an inert, absorbent material, such as sand and disposed of in accordance with regulations.

Health & Safety: Please refer to health & safety data sheet on Black Bituminous Paint

 

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat