Jotun Barrier Plus - 2K Zinc High Solids Epoxy Primer - 9 Litre
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Barrier Plus - 2K Zinc
Jotun Barrier Plus is a two pack polyamide cured zinc rich epoxy primer coating. It is a high solids and a very high zinc dust containing product. It provides excellent corrosion protection as part of a complete coating system. To be used as a primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.
It can be applied down to 0 °C surface temperature so perfect for application in colder environments where other protective coatings cannot be applied.
Jotun Barrier Plus has been extensively tested and the tests have shown superior performance in adhesion/cohesion and electrical conductivity when compared to traditional zinc rich epoxy coatings.
Approvals and Certifications of Jotun Barrier Plus
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
Typical Use of Jotun Barrier Plus
Suitable for structural steel and piping to be exposed to very high corrosive environments, C5I or C5M (ISO 12944-2). Jotun Barrier Plus is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as an epoxy primer in coating systems where extended durability is required.
Spray: Use airless spray
Brush: Recommended for small areas. Take care to meet the recommended film thickness
Storage and health considerations of Jotun Barrier Plus
Here at Ultrimax Coatings, we recommend that all users store their Jotun Barrier Plus inline with the national regulations. Regulations include keeping the product away from heat and ignition sources, and storing the pots in well ventilated, cool and dry areas. Remember to always keep the lid of the container tightly closed.
Ideally this product should be used by professionals only, or under close supervision. We recommend you always wear the correct safety gear and PPE when mixing, stirring and applying this product.
Other tips to follow include:
- Always use the product under well ventilated conditions
- Do not inhale any mist from the spray
- Avoid skin contact and use soap and water (or a suitable cleanser) if spillage on the skin occurs
The Jotun Group is a leading manufacturer of high-performance coatings supplied in the UK by Ultrimax Coatings who are proud to be a Jotun paint supplier and distributer. Jotun has 37 production plants in 21 countries and is now represented in over 100 countries worldwide. Jotun paints have been used on the Southern Cross Railway Station in Melbourne, the Kingdom Centre in Riyadh and even on the Eiffel Tower in Paris. From topcoats in moist conditions, such as Hardtop Flexi and Pioner Topcoat, through to a wide range of epoxy coatings such as Jotamastic 90 and also paint thinners for all coatings. Jotun Paints are specialists in products used in extreme environments like the Jotun Barrier Plus zinc rich epoxy primer.
Manufacturer - Jotun
Water / Solvent Based - Solvent
For Use On - Steel
Application Method - Airless Spray, Brush
Sheen - Matt
Colour - Standard / Ready Mixed
Single, Two or Three Pack - Two-Pack
Product Certifications - NORSOK M-501, Rev. 5, System 1,
Pack Size - 8.75L
Coverage - 4.8 to 12m²/l
Touch Dry - 25 mins
UN Number (Activator) - UN1263
UN Number (Base) - UN3469
Other Customers Also Bought:
The below products are often purchased together with the above item.