• Jotun Steelmaster 60sb - White
  • IPF213 2
  • IPF213 3
  • IPF213 2
  • IPF213 3

Jotun Paints Steelmaster Intumescent 60SB - 20L

Product Ref: IPF213

2 people have viewed this product in the last 24 hours

20 Litre
£487.00 ex. VAT £584.40 inc. VATRRP: £0.00
View Favourites

In stockDelivered within 3-4 Days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

 jotun paints intumescent paint

Jotun Paints Steelmaster 60SB (Solvent Based) Intumescent - 20L

Jotun Steelmaster 60SB (Solvent Based) Intumescent Paint is a one component Solvent based acrylic thin film heat resistant coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as mid coat or finish coat in atmospheric environments. Suitable on approved primers on carbon steel substrates. On contact with fire or intense heat this paint bubbles, foams and expands to engulf the fire which for 60 minutes will protect the structural integrity of the steel it is protecting. This action provides life saving time to exit a structure or building in the event of fire.Jotun Steelmaster 60SB is specially designed as passive fire protection for steel constructions. To be used as part of a complete system for interior environments up to C4 (ISO 12944-2),

Typical Use For Temperature Paints

Jotun Paints Steelmaster 1200WF Intumescent Paint is specially designed as reactive fire protection systems for steel constructions. Designed to protect up to 180 minutes on a wide range of I section beams and columns. Suitable for structural steel exposed to internal environments.

  • Solvent Based single pack.
  • Up to 60 minute protection.
  • Thin film intumescent.
  • Internal C1 to C4 environment.
  • Tested to BS 476 part 20 and 21.
  • ASTM E84
  • Can be used on semi exposed or exposed locations
  • Please Note: SteelMaster 60SB can be exposed without topcoat for 3 months during construction phase or up to 6 months with an approved topcoat. Whether topcoated or not, the coating must be protected from condensation, ponding/ pooling water due to rainfall or running water, provided it has had appropriate drying prior to exposure. This also extends to snow and ice.

Additional certificates and approvals may be available on request.

 

Jotun Paints Features & Benefits

  • Low thickness required
  • HAPS free, green product
  • Increases productivity
  • Ready to use, easy airless spray application
  • Quicker project completion
  • Low VOC, low environmental impact
  • Safe for multiple trades
  • Tested to BS 476 (20 and 21)

 

Intumescent Paint Approvals And Certificates

This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.

  • BS 476 part 20/21: Certifire CF 5170
  • EN 13381-8
  • CE marked product with European Technical Assessment ETA-20/1294
  • Durability and Serviceability: Z2, Z1, Y (ETAG 018-2)
  • ASTM E84: Class A

Additional certificates and approvals may be available on request.

 

Jotun Paints

Jotun Paints protects property, Jotun is one of the world's leading paints and coatings manufacturers, combining the best quality with constant innovation and creativity. For almost a century, we have protected all types of property - from iconic buildings to beautiful homes.

Technical Detail

 jotun paints intumescent paint

 

Jotun Paints Intumescent 60SB

Application - Brush, Spray

Touch Dry - 30 mins

Recoat (Dry at 23 degrees) - 6 Hours

Protection - 60 minute protection

Please Note: SteelMaster 60SB can be exposed without topcoat for 3 months during construction phase or up to 6 months with an approved topcoat. Whether topcoated or not, the coating must be protected from condensation, ponding/ pooling water due to rainfall or running water, provided it has had appropriate drying prior to exposure. This also extends to snow and ice.

 

 

Compare Products (0)
Chat