• Ultrizinc - 4 Litre
  • IPZ105 3
  • IPZ105 2
  • IPZ105 4
  • IPZ105 5
  • IPZ105 6

Ultrizinc - Heat Resistant to 400°C Zinc Rich Grey Primer Paint - 4 Litre

Product Ref: IPZ105

2 people have viewed this product in the last 24 hours

£119.80 ex. VAT £143.76 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

 

Ultrizinc - Heat Resistant To 400°C Zinc Rich Grey Primer Paint - 4 Litre

 

IN THE BOX

1 x 4ltr tin of Heat Resistant Ultrizinc with improved ring and latch closer

 

Ultrizinc Heat Resistant Zinc Rich Primer is perfect for fabrication and shop environments. Based on a synthetic polymer which contains over 92% zinc (by weight when dry), the primer provides cathodic protection to steel. In other words, a barrier coating which prevents the spread of rust that's perfect for applications in the energy industry.

Ultrizinc is suitable for iron and steel to protect against corrosion. The coating must be in direct contact with the iron or steel to work correctly.

Available in grey, for a matt sheen level finish. Once applied Ultrizinc will hard dry in 2-4 hours and is heat resistant to 400 degrees.

 

Heat Resistant to 400°C

Ultrizinc has significant protection against heat and provides industry leading temperature paint protection up to 400°C. This means Ultrizinc can be successfully applied on industrial, commercial and even stoves and BBQ's.

 

Major Benefits of Zinc Rich Primer

  • Anti-Corrosive inc Phosphate mix protects against rust and corrosion
  • Heat Resistant to 400°C
  • Fast drying within 2-4 hours
  • High Volume Solids ensures easy and quick application as a metal paint
  • Matt sheen level
  • Apply via brush or airless spray (thinning with Xylene thinners 20% max - see recommended products below)

Applying to Bare Steel

Please note: Must be applied to bare iron or steel to be effective and can be over-coated with a wide range of suitable topcoats, or with a Zinc Phosphate Primer as part of a specified anti-corrosive system.

Technical Detail

 

FEATURES

Fast Drying

High volume solids

Contains zinc phosphate active anti-corrosive pigments

 

RECOMMENDED USE

Anti-corrosive primer for steel in moderate, non aggressive environments.

 

PHYSICAL PROPERTIES

Gloss Level:Matt

Colour:Grey

Flash Point: 24ºC

VOC: 380 g/litre

 

SURFACE PREPARATION

Degrease, remove rust and mill scale, best results by shot blasting.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat