We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
IN THE BOX
1 x 4ltr tin of Heat Resistant Ultrizinc with improved ring and latch closer
Ultrizinc Heat Resistant Zinc Rich Primer is perfect for fabrication and shop environments. Based on a synthetic polymer which contains over 92% zinc (by weight when dry), the primer provides cathodic protection to steel. In other words, a barrier coating which prevents the spread of rust that's perfect for applications in the energy industry.
Ultrizinc is suitable for iron and steel to protect against corrosion. The coating must be in direct contact with the iron or steel to work correctly.
Available in grey, for a matt sheen level finish. Once applied Ultrizinc will hard dry in 2-4 hours and is heat resistant to 400 degrees.
Ultrizinc has significant protection against heat and provides industry leading temperature paint protection up to 400°C. This means Ultrizinc can be successfully applied on industrial, commercial and even stoves and BBQ's.
Please note: Must be applied to bare iron or steel to be effective and can be over-coated with a wide range of suitable topcoats, or with a Zinc Phosphate Primer as part of a specified anti-corrosive system.
High volume solids
Contains zinc phosphate active anti-corrosive pigments
Anti-corrosive primer for steel in moderate, non aggressive environments.
Flash Point: 24ºC
VOC: 380 g/litre
Degrease, remove rust and mill scale, best results by shot blasting.
Published: June 29, 2020
Published: October 6, 2020
Published: July 2, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.