Ultrimax 2k Rocket Paint Accelerator - 250ml
Product Ref: PAU000
2 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Write a review
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Ultrimax 2K Rocket Paint Accelerator
A super accelerator for 2K paints, clearcoats and primers. Speeds up demasking and overpainting when mixed with 2K hardeners. Increase throughput and improve profits.
Rocket Accelerator is an additive which is used in small quantities with 2K hardeners to accelerate through curing. It may be used with normal or medium solids (MS) systems for air drying or stoving. It accelerates the through – curing of topcoats and 2K clears significantly reducing stoving times and offering increased throughput and energy-saving in the body shop.
MIXING 2K Rocket Accelerator
- Open a fresh can of 2K hardener, remove the seal and add Rocket-Fuel as follows: - Push the cap of the Rocket-Fuel container down and loosen slightly. - Squeeze the container gently to fill the reservoir (10ml). - 2K conventional hardeners add 2 reservoirs full (20ml) per litre. - MS hardeners add 3 reservoirs full of (30ml) per litre. - Replace lid tightly and shake well to mix the contents of the 2K hardener can. - Use the catalysed hardener in the normal way with 2K colours or 2K clears.