• Jota Armour- Non Slip Kit - Grey 38
  • IPJA20G 2

Jotun Jota Armour Non Slip Epoxy Floor Paint - Grey 38 - 9.3 Litre

Product Ref: IPJA20G

7 people have viewed this product in the last 24 hours

9.3 Litre
£128.09 ex. VAT £153.71 inc. VATRRP: £0.00
View Favourites

In stock2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description




Jotun Jota Armour Non Slip Kit

Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.

Jotun Jota Armour can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.


Approvals and certificates

  • Approved to UK Defence Standard 80-134/1 for the Royal Navy, flight decks, hangar decks and weather decks
  • Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 4, suitable for decks and walkways.

Additional certificates and approvals may be available on request.


Features & Benefits

  • Spray application – no trowelling
  • High build – one coat system
  • Non-slip surface
  • non-slip performance in wet, oily and icy conditions

Rough and tough
Jota Armour combines a high solids, surface tolerant . abrasion resistant, epoxy coating with a selected blend of fused aluminium oxide.

High coefficient og friction (COF)
The surface profile is rough with deep and sharp asperities – creating a high COF that provides exceptional non-slip properties for people and equipment even when applied on a sloping ramp or walk-way.

NORSOK pre-qualification
Baltoflake is pre-qualified in NORSOK coating systems (System no.4).


The product is sold as kits.

Uses for Jota Armour Non Slip Epoxy Floor Paint

For severe dry, wet and oily conditions requiring durability, wear resistance, anti-slip properties, such as flight decks, military applications, extreme environments, or walkways, ramps etc.

Features & Benefits

  • High build so only a single coat required
  • Non-slip surface under dry, wet, and oily conditions

Surface Preparation and Application

The surface should be clean, free of any contaminants and dry before applying Jota Armour. This will ensure you get the best performance out of your coating.

Jota Armour should be applied by gravity-fed hopper spray gun or other suitable equipment.


Technical Detail

Jota Armour Technical Details

  • Solids - 90%
  • VOC - 70gms/litre
  • Spreading rate - 0.9sqm/ltr
  • Gloss - Semi-gloss
  • Thinners - No.17

How to Prepare Jota Armour Non Slip Epoxy Floor Paint

First, you need to mix the Comp A and Comp B together thoroughly. Then you should add Comp C (the graded aggregate) to achieve the non-slip finish. This should be done around 10 minutes before applying the paint finish

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK