• Penguard FC - Bs. 00a01
  • IPFT05-00A01 2
  • IPFT05-00A01 3

Jotun Paints Penguard FC - 2K - BS. 00A01

Product Ref: IPFT05-00A01

3 people have viewed this product in the last 24 hours


Choose Colour

Current colour: Ash grey / Oyster grey / Portland (BS. 00A01)

£73.82 ex. VAT £88.58 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description


Penguard FC - The Epoxy Paint

Jotun Penguard FC is a high build, two component polyamide cured epoxy paint. This product is tintable in a wide range of colours via Jotun Paint's Multi-colour Industry system.

Penguard FC is an epoxy finish coat to be used when cosmetic appearance of an epoxy finish is acceptable. It can also be used as an anti corrosive primer in mild to medium environment for steel and concrete above water areas or as an intermediate coat in more corrosive environment.

Semi-Gloss Finish


Price Promise On Jotun Paints 2 Pack

Our Price Promise : Our Jotun Paints 2 Pack Products Pricing includes BOTH Paint and Hardener as a package. Does your competitor offer the same?


Areas of Use

Marine: Recommended for all non immersed areas.Protective: Suitable for a wide range of industrial structures.


Approvals and certificates

  • Low flame spread certificate acording to IMO/Solas directiv


Anti-Corrosive 2 Pack Primer

An anti corrosive primer and/or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure where fast dry-to-recoat and/or dry-to-handle times are desired. Can be used alone or in various systems of primers and topcoats.

Colours - Any RAL, British Standard


Other Penguard Undercoat Paints for Steel

Other variants available

Penguard Express ZP

Penguard Express

Penguard Express MIO

Penguard Express CF

Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment. Refer to separate TDS for each variant


Jotun Primer Application methods

The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.


Thinners / Cleaning solvent to use with Metal Primer Paint

Thinner: Jotun Thinner No. 17


Undercoat Paint to Top Coat Product Compatibility

Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact Ultrimax for specific system recommendations.

Previous coat: inorganic zinc silicate shop primer, epoxy, epoxy mastic, zinc epoxy, zinc silicate, organic shop primer

Subsequent coat: acrylic, epoxy, polyurethane, polysiloxane


Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK