Product Ref: IPCT05-VCEG
3 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a semi-matt finish. It is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.
Jotun Conseal Touch-Up is recommended for refineries, power plants, containers, bridges and buildings. Suitable for a wide range of industrial structures.
Features of Jotun Conseal Touch-Up
The Jotun Conseal Touch-Up available at Ultrimax Store provides a long-lasting finish. It can be applied using a conventional airless spray, a roller or brush. If an airless spray is used for application, the paint must be diluted by 5-10%, while a roller is not recommended for the first coat on bare metal. If using a brush, take care to select a suitable one depending on the surface of application.
Other notable features include:
- Excellent flexibility and water resistance
- Good colour retention
- Shelf life at 23 °C of 48 months (this is the minimum shelf life as specified by Jotun)
Depending on the level of exposure, various topcoats and primers can also be used with this product, including epoxy, zinc epoxy, shop primer and acrylic.
Storage and health considerations of Jotun Conseal Touch-up for sale
Here at Ultrimax Store, we recommend that all users store their Jotun Conseal Touch-up inline with the national regulations. Regulations include keeping the product away from heat and ignition sources, and storing the pots in well ventilated, cool and dry areas. Remember to always keep the lid of the container tightly closed.
Ideally this product should be used by professionals only, or under close supervision. We recommend you always wear the correct safety gear and PPE when mixing, stirring and applying this product.
Other tips to follow include:
- Always use the product under well ventilated conditions
- Do not inhale any mist from the spray
- Avoid skin contact and use soap and water (or a suitable cleanser) if spillage on the skin occurs
- Wash your eyes with water if the spray comes into contact with your face
For Use On - Steel, Aluminium
Application Method - Brush, Roller, Spray
Sheen - Matt
Colour - Fully Tintable
Single, Two or Three Pack - Single
Pack Size - 5L, 20L
Application - Brush, Roller, Spray
Coverage - 4.1 to 6.5m²/l
Touch Dry - 20 mins
UN Number - UN1263
Published: June 23, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.