• Conseal Tu - Bs. 00a01
  • ipct05-00a01 - 2
  • ipct05-00a01 - 4
  • ipct05-00a01 - 3

Jotun Paints Conseal TU 1K - BS. 00A01

Product Ref: IPCT05-00A01

7 people have viewed this product in the last 24 hours

Colour

Choose Colour

Current colour: Ash grey / Oyster grey / Portland (BS. 00A01)

£0.00 ex. VAT £0.00 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

 

Jotun Conseal Touch-Up - 1K Paint

Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a semi-matt finish. It is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.

Jotun Conseal Touch-Up is recommended for refineries, power plants, containers, bridges and buildings. Suitable for a wide range of industrial structures.

 

Features of Jotun Conseal Touch-Up

The Jotun Conseal Touch-Up available at Ultrimax Store provides a long-lasting finish. It can be applied using a conventional airless spray, a roller or brush. If an airless spray is used for application, the paint must be diluted by 5-10%, while a roller is not recommended for the first coat on bare metal. If using a brush, take care to select a suitable one depending on the surface of application.

Other notable features include:
- Excellent flexibility and water resistance
- Good colour retention
- Shelf life at 23 °C of 48 months (this is the minimum shelf life as specified by Jotun)

Depending on the level of exposure, various topcoats and primers can also be used with this product, including epoxy, zinc epoxy, shop primer and acrylic.

 

Storage and health considerations of Jotun Conseal Touch-up for sale


Here at Ultrimax Store, we recommend that all users store their Jotun Conseal Touch-up inline with the national regulations. Regulations include keeping the product away from heat and ignition sources, and storing the pots in well ventilated, cool and dry areas. Remember to always keep the lid of the container tightly closed.

Ideally this product should be used by professionals only, or under close supervision. We recommend you always wear the correct safety gear and PPE when mixing, stirring and applying this product.

Other tips to follow include:
- Always use the product under well ventilated conditions
- Do not inhale any mist from the spray
- Avoid skin contact and use soap and water (or a suitable cleanser) if spillage on the skin occurs
- Wash your eyes with water if the spray comes into contact with your face

 

Buy Jotun Conseal Touch-up today

Jotun Conseal Touch-up is available to buy from Ultrimax Store today. Contact us for more advice regarding this product - we're always happy to advise on the correct application procedures and storage conditions. Note: the Jotun Thinner No. 7 is the suitable thinner/cleaning solvent for the Jotun Conseal Touch-up.

Technical Detail

Manufacturer - Jotun

For Use On - Steel, Aluminium

Application Method - Brush, Roller, Spray

Sheen - Matt

Colour - Fully Tintable

Single, Two or Three Pack - Single

Pack Size - 5L, 20L

Application - Brush, Roller, Spray

Coverage -4.1 to 6.5m²/l

Touch Dry - 20 mins

UN Number - UN1263

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat