Jotamastic 90 - Two-pack Epoxy Mastic Coating

Product Ref: IPJ905
5 Litre

Ex VAT

Inc VAT

£57.00

£68.40

in stock

In Stock

Now
Order before 3pm

Next day delivery

Fast Turnaround
Free delivery

Free delivery*

On orders over £195

Jotamastic 90 - Two-pack Epoxy Mastic Coating

Jotun Jotamastic 90 is a two-pack epoxy mastic coating that is a surface tolerant, abrasion-resistant, high solids and high build. This product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long-lasting protection in environments with high corrosivity and can be used as a primer, mid-coat, finish coat or as single coat system in atmospheric and immersed environments.

Jotun Jotamastic 90 is suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub-zero surface temperatures.

Jotamastic 90 Overview

 

Areas of Use For Jotamastic 90

General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Features & Benefits

  • Tintable so available in most colours
  • Very good surface tolerance
  • Fast curing
  • Has a wide DFT range

Jotun Jotamastic 90 Epoxy Mastic Primer Technical Details

  • Solids - 80%
  • VOC - 170gms/litre
  • Spreading rate - 6.4sqm/ltr
  • Gloss - Semi-gloss
  • Thinners - No.17

Approvals and Certificates

  • Low flame spread certificate according to IMO FTPC Part 5
  • Highways Agency Approved - Item No. 116
  • Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87)
  • NORSOK System 1, Rev.5
  • Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20 and M24 (Cert. No's. XM92/M20-168, XM92/M24-169, XM92/M24-170) Item 7.1.7.

Application of Jotamastic 90

Due to the high surface tolerance of Jotamastic 90, it can be applied onto very poorly prepared surfaces. This means that where other coatings will fail and not adhere properly to the surface, Jotamastic 90 can be applied and it will still provide very good protection.

If applying the jotamastic 90 by spray application, use an airless spray system. Brush and roller can be used but take care to achieve the correct film thickness. It isn't recommended to use a roller when applying the first primer coat.

Need help and advice? Call us

Need any help or advice?

Call us on +44 (0) 1302 856666


logo


Ultrimax Coatings 2017

  • Visa
  • Maestro
  • Mastercard
  • Paypal
  • Solo


*This is only for items marked ‘In Stock*