Product Ref: BFW201
4 people have viewed this product in the last 24 hours
Out of stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
This Ultrimax green and white fibre filter is used as both a primary or secondary filter for spray booth extraction. In addition to filtering heavy dust, it filters air entering a booth or product preparation area. Our filter rolls are constructed from progressively built glass fibre which gives a filter media that is designed primarily for the filtration of solvent based paint and lacquer-particles. It is easily cut so can be made to fit any size within your booth.
Depending on the use, this can be used as the primary extract filter with the secondary media roll for the dual level of protection of ducts and fan systems. The glass fibre matrix of this extract filter is not dense to catch finer mists and sprays in spray booth paint applications but is robust enough to collect heavier dust and paint particles.
To ensure a spray booth is operating to its maximum ability, the spray booth environment must be properly sealed. An air system will create the optimum airflow for a booth but this airflow must be properly filtered to protect the quality of items painted in the spray booth and the booth workers. A spray booth extract filter roll effectively filters the air to prevent hazardous chemicals or particles being breathed in by individuals both inside and outside the booth. This creates a safe work environment for workers and reduces any major health and safety risks.
Constructed from quality built glass fibre, a spray booth extract filter roll prevents contaminants, such as heavy dust particles, from entering a spray booth. This is beneficial as it ensures solvent and lacquer-based paint jobs can be completed to a high-standard without contaminants compromising the finish of the paintwork. An effective filtration system will save time and money spent on correcting poor paint jobs caused by a compromised spray booth environment.
Thanks to the unique design of the spray booth extract filter roll, cutting and sizing the extract filter is effortless. With each roll having dimensions of 1m x 20m x 50mm the filter can be easily customised to fit the exact specifications of a spray booth. Though spray booths can differ in size, in general, a spray booth extract filter is needed on all vents, including ceiling vents and cross draft vents. The convenient roll design makes covering l
Average Paint Arrestance : 95-98%
Initial Resistance : 7-40 Pa
Paint Holding Capacity* : 3500-4700 g/m² - *At 80Pa and 0.7 m/s
Published: April 20, 2018
Published: January 6, 2020
Published: June 9, 2020
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023
Published: October 24, 2023