We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Are you looking to upcycle wood furniture? Repaint a metal fence? Or quickly recover a room from an awful past colour?
Rustoleum No.1 Green Paint Stripper paint remover is your number one tool for removing old paint. It strips all types of paint from, metal or walls. It’s quick acting, has a gel-like paste that works at low temperatures, works on glues as well as paint and is the most effective green paint stripper on the market. Its skill set, as mentioned above, will be quick and effective in getting your renovation product underway. If you are stuck for time, it is more effective than any other paint strippers on the market so will make your job quicker and less time-consuming.
It also contains no methylene chloride. This makes it safe to be used around more vulnerable environments and a safer choice to use in busier households. Due to being able used in low temperatures, it is suitable to be used in all households and can operate in a number of climates.
Rustoleum No.1 Green Paint Stripper can also be used on all types of oil and alkyd based paints – making it a cupboard essential and a must-have for all those thinking of remodelling or doing a furniture makeover.
If you’re unsure about how to make the best use of Rustoleum No. 1 Green Paint Stripper, make sure you check out the video below for how to use it in a safe and productive way.
It can be used in all kinds of scenarios from outdoor appliances such as garden sheds and fences to indoor furniture and room walls. The versatility of Rustoleum No.1 Green Paint Stripper makes it an attractive product to customers as it suits many jobs and has multiple usage benefits. It is a cupboard staple for anyone who enjoys stripping paint and making improvements to their home or office space. The versatility of this product also makes it attractive to those in the decorating trade as it can be used for many jobs - get yours today!
No.1 Green Paint Stripper is a highly effective paint dissolving/lifting material without methylene chloride. Removes all paint types.
No.1 Green Paint Stripper should be used for quick removal of old paint. The product is intended to remove all types of oil- and alkyd-based paints, emulsion paints, varnish and most two-component materials from metal, mineral and wooden substrates.
All Ultrimax paint stripper and thinner is produced in the UK, is available from a UK trade counter if required or delivered on next delivery** to the UK mainland. Ultrimax is a specialist in paint and therefore our paint stripper has been specially formulated since 1973 to provide the best solutions for paint thinning and spray equipment and brush cleaning, our formulas are the result of 50 yrs of testing and tweaking you won't find solutions with the same quality of ingredient and thinners performance anywhere else.
** Delivery next day where order is placed online before 2pm
We've produced a special training video called 'Paint Thinners and Strippers Explained - Which , Why & When?'. This gives you a quick snapshot of which thinner to choose for each situation no matter if you are thinning gloss paint for a pristine paint finish or you are cleaning down spray lines and spray guns. Click the VIDEO tab at the top of this page.
We also have a full article if you prefer a read in our knowledge centre titled 'How To Choose The Best Paint Stripper & Thinner'
Coverage: 2-3m² per 500ml Aerosol / 2-4m² per litre
Practical coverage depends on many factors such as type of old coating and shape of the substrate and material losses during application.
Temperature of air, substrate and material between 0 and 30°C and relative humidity below 85%
Application And Thinning: Brush
Apply Green Paint Stripper thickly in an even layer with a brush (disposable brush, flat or round). Do not use synthetic brushes. Allow to stand for 10 to 15 minutes, and remove the old layer with a filling knife or paint scraper. Thick layers of some (two-component) products may need an additional treatment. After use, clean the surface with a cleaner , high pressure (steam) cleaning, fresh water and allow to dry completely before applying a coating.
Published: June 29, 2020
Published: October 15, 2020
Published: July 2, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.