Product Ref: AMA0360
2 people have viewed this product in the last 24 hours
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Mirka Abralon Discs 34mm are an exceptional, multifunctional patented sanding material with a hook and eye backing.
Use Mirka Abralon for flexible sanding of both smooth and profiled surfaces.
To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled surfaces and edges.
Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand.
Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.
These discs are ideal for use with the Mirka AOS130NV Sander.
Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications.
Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pot marked surfaces and the preparation of the top coat prior to polishing.
Published: July 26, 2017
Published: June 8, 2020
Published: June 29, 2020
Published: October 9, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
The below products are often purchased together with the above item.