Time Remaining
Product Ref: ASD51000
3 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
Abralon® creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon® is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon® is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.
Coarser grits are recommended for – surface preparation of composite body parts – fine sanding of the body surfaces before primer and lacquer etc.
Finer grits are suitable for – smoothing of primers and bottom lacquers – preparation of surfaces between blending – sanding of pot marked surfaces – preparation of the top coat before polishing
Published: July 26, 2017
Published: June 8, 2020
Published: June 29, 2020
Published: October 9, 2020
Published: July 2, 2021
Published: July 27, 2021
Published: November 9, 2021
The below products are often purchased together with the above item.
